Pond design, bio-filtration and Koi health benefit
from good circulation and maximum CO2
KPC's jets benefit ponds in
circulating surface water, increasing oxygen saturation and
are used with owner’s pumped water supply returning to the pond,
eliminating need for air pumps and air stones. Adjustable
directional flow increases skimmers potential in removing surface
debris before it has a chance to settle to the bottom. Usage
of the jet also aids in benefiting bio-filtration, water quality
and healthier fish.
The eductor design jets solves inadequate circulation
and can be used to maximize oxygen content. Water flowing though
the eductor creates pressure, which in turn draws additional
water from eductor side port. This results in an increase of
water discharge.
Vinyl tubing is standard and if used, will
draw air in, mixing into the high velocity jet stream
and increasing the ponds oxygen content level.
Are you using an air
pump when you can be using your pumped water?
Each
Jet assembly is assembled with top quality parts and comes with 3
feet of vinyl air tubing, complete with screened intake to keep bugs
out. Jets require one inch inside diameter flex hose from pumped water
source. PVC flex hose is included with Basic & Premier kits only.
Description
Price
KPC Basic Jet & Hose Kit
3 Jets, 3 Elbows,
3 Extenders, 4 - 1" barbed "T"s, vinyl air tube,
Includes 50' of 1" Flex Hose. COMPLETE KIT
KPC Premier
Jet & Hose Kit
5
Jets, 5 Elbows, 5 Extenders, 6 - 1" barbed "T"s,
vinyl air tube, Includes 50' of 1" Flex Hose. COMPLETE
KIT
Components
to build your own kit:
1 KPC Custom Jet
1
Jet, Elbow, Extender, 1" barbed "T", vinyl air tube, (No 1" flex hose included)
5 KPC Custom Jets
5
Jets, 5 Elbows, 5 Extenders, 6 - 1" barbed "T"s,
vinyl air tube, (No 1" flex hose included)
1” x 50’ Flex Hose
Flexible black PVC hose withstands 50 PSI of pressure,
resists kinking, is fish safe and very flexible. Fits PVC S-40
fittings.
1” x 100’ Flex Hose
Flexible black PVC hose withstands 50 PSI of pressure,
resists kinking, is fish safe and very flexible. Fits PVC S-40
fittings.
Plastic 1" “Elbow” fittings (2)
Don't forget to add 2 barbed "Elbows" if building
your own kit and don't want to loop the hose all the way back
to the source "T"!
Plastic 1" “T” fitting (1)
Don't forget to add a barbed "T" if building your
own kit!
Jets feature adjustable
angles, direction and sturdy PVC parts.
Jets help when adding treatments to the pond that require more
oxygen or circulation.
The hose
lays on ponds shelf and is covered with rocks for natural look.
Installation
of jets are as simple as cutting the hose at desired jet locations, then
insert the jet's barbed T fittings.
Koi fish enjoy playing in and around the moving water and air bubbles....
Winter Tip: Jets aid in keeping open areas
on the pond surface during cold winters. Water that is moving is
much harder to freeze!